Job Detail
Lists detailed information about a job.
Job Information
| Field | Description |
|---|---|
| Job | Job name (SMF30JBN) |
| Job Number | The job identifier JOBnnnnn, STCnnnnn, TSUnnnnn etc. (SMF30JNM) |
| Submitted | The time the job was submitted (SMF30RSD + SMF30RST) |
| Started | The time the initiator selected the job (SMF30STD + SMF30SIT) |
| Ended | The time the job ended (SMF30DTE + SMF30TME from the subtype 5 record.) |
| Elapsed | Job elapsed time (end time - initiator select time) |
| Derived CPU | CPU time calculated from the TCB and SRB CPU service values. This provides a more accurate value than the CPU time fields from the SMF 30 record, which are rounded to 1/100th of a second. The value includes Normalized zAAP and zIIP time which means that the value will exceed the total of actual CP + zAAP + zIIP time where the zAAP/zIIP is faster than the regular CP. |
| TCB | Standard CPU time (SMF30CPT) |
| SRB | SRB CPU time (SMF30CPS) |
| Connect | I/O device connect time (SMF30TCN) |
| EXCP | I/O blocks transferred. (SMF30TEP or SMF30TEX) |
| CC | The condition code of the last executed step. (SMF30SCC from subtype 4 record) |
| System | The system that wrote the record |
| Userid | The user id of the job. (SMF30RUD) |
| Programmer Name | The Programmer Name field. (SMF30USR) |
| Accounting Information | All accounting fields for the job, separated by commas. (SMF30ACT) |
| Class | Job class (SMF30CLS) |
| Workload | Workload manager workload name (SMF30WLM) |
| Service Class | Service class name. (SMF30SCN) |
| Report Class | Report class name. (SMF30RCN) |
| Sched. Environment | Scheduling environment name (SMF30PFL) |
Pre Execution delays
| Field | Description |
|---|---|
| Preparation | Job preparation time. (SMF30JQT) |
| Ineligible for Execution | The time the job was ineligible for execution due to the eligible systems or scheduling environment being unavailable. (SMF30RQT) |
| Held/Duplicate Jobname | The time the job was ineligible for execution for other reasons e.g. job or queues held, or duplicate job name. (SMF30HQT) |
| Wait for Initiator | The time the job was eligible for execution but not yet started. (SMF30SQT) |
Service
Service is shown at both Job level and Step level
| Field | Description |
|---|---|
| TCB | TCB Service Units (SMF30CSU) |
| SRB | SRB Service Units (SMF30SRB) |
| I/O | I/O Service Units (SMF30IO) |
| MSO | Main Storage Occupancy Service Units (SMF30MSO) |
| Service | Total Service Units (SMF30SRV) |
CPU Times
CPU times are shown at both Job level and Step level
| Field | Description |
|---|---|
| Derived CPU | CPU time calculated from the TCB and SRB CPU service values. This provides a more accurate value than the CPU time fields from the SMF 30 record, which are rounded to 1/100th of a second. The value includes Normalized zAAP and zIIP time which means that the value will exceed the total of actual CP + zAAP + zIIP time where the zAAP/zIIP is faster than the regular CP. |
| CP | Time spent on a standard CP |
| zIIP | Time spent on a zIIP Normalized: The equivalent time if the work had run on a standard CP. |
| zIIP on CP | Time spent by zIIP eligible work on a standard CP (included in CP time) |
| zAAP | Time spent on a zIIP Normalized: The equivalent time if the work had run on a standard CP. |
| zAAP on CP | Time spent by zAAP eligible work on a standard CP (included in CP time) |
zEDC Statistics
zEDC Statistics are shown at both Job level and Step level if present.
| Field | Description |
|---|---|
| zEDC Time | zEDC execution time (SMF30_US_ExecTime) |
| Queue Time | zEDC queue time (SMF30_US_QueueTime) |
| Requests | Total number of zEDC requests (SMF30_US_ComprReq) |
| Problem State | Number of problem state zEDC requests (SMF30_US_ComprReq_Prob) |
| Compress Bytes | Number of input bytes compressed (SMF30_US_Def_UncomprIn) |
| Decompress Bytes | Number of output bytes decompressed (SMF30_US_Inf_DecomprOut) |
| Compress % | Overall compression percentage (space saved) e.g. 100MB before compression, 10 MB after compression is 90% compression. ( 1 - ( SMF30_US_Def_ComprOut + SMF30_US_Inf_ComprIn ) / ( SMF30_US_Def_UncomprIn + SMF30_US_Inf_DecomprOut ) ) |
Storage
Storage information is shown at both Job level and Step level
| Field | Description |
|---|---|
| Region | Region size (SMF30RGN) |
| Memlimit | MEMLIMIT (SMF30MEM) |
| Private Area - Below | Private area size below 16MB (SMF30RGB) |
| Private Area - Above | Private area size above 16MB (SMF30ERG) |
| Private Area - 64 Bit Usable | Maximum usable 64 bit storage obtained. Excludes guarded storage. (SMF30HVH) |
| Private Area - 64 Bit Real | Maximum real storage used for 64 bit private storage (SMF30HVR) |
| Private Area - 64 Bit Aux | Maximum auxiliary storage used for 64 bit private storage (SMF30HVA) |
| User Allocated - Below | Maximum storage used from the user subpools below 16MB (SMF30URB) |
| User Allocated - Above | Maximum storage used from the user subpools above 16MB (SMF30EUR) |
| System Allocated - Below | Maximum storage used from the system subpools below 16MB (LSQA and SWA) (SMF30ARB) |
| System Allocated - Above | Maximum storage used from the system subpools above 16MB (LSQA and SWA) (SMF30EAR) |
| Shared - 64 Bit Usable | Maximum usable 64 bit shared storage the job has access to. (SMF30HSH) |
| Pages In | Number of pages paged in from auxiliary storage (SMF30PGI) |
| Pages out | Number of pages paged out to auxiliary storage (SMF30PGO) |
| Swaps | Number of address space swaps (SMF30NSW) |
Step Information
| Field | Description |
|---|---|
| Step | Step number (SMF30STN) |
| Name | Step name (SMF30STM) |
| Program | Program name (SMF30PGM) |
| Ended | The time the step ended (SMF30DTE + SMF30TME from the subtype 4 record.) |
| Elapsed | Step elapsed time (Step end time - step initiator select time) |
| Normalized | CPU time calculated from the TCB and SRB CPU service values. This provides a more accurate value than the CPU time fields from the SMF 30 record, which are rounded to 1/100th of a second. The value includes Normalized zAAP and zIIP time which means that the value will exceed the total of actual CP + zAAP + zIIP time where the zAAP/zIIP is faster than the regular CP. |
| TCB | Step standard CPU time (SMF30CPT) |
| SRB | Step SRB CPU time (SMF30CPS) |
| zIIP | Step zIIP CPU time (SMF30_TIME_ON_ZIIP) |
| zAAP | Step zAAP CPU time (SMF30_TIME_ON_IFA) |
| Connect | Step I/O device connect time (SMF30TCN) |
| EXCP | Step I/O blocks transferred. (SMF30TEP or SMF30TEX) |
| CC | Step condition code (SMF30SCC) |
I/O information
The I/O Information section lists information from the type 30 EXCP sections for the step. To limit the number of entries, EXCP sections are consolidated where the DD name, device class, unit type and CUA are the same.
| Field | Description |
|---|---|
| DDNAME | DD name (SMF30DDN) |
| Unit | Unit address, or VIO (SMF30CUA) |
| Block Size | Largest block size (SMF30XBS or SMF30BSZ) |
| Blocks | Number of blocks transferred (SMF30BLK) |
| Connect Time | Device connect time (SMF30DCT) |
| EXCP Sections | The number of EXCP sections consolidated by EasySMF into this entry. |
Report Parameters
| Parameter | Description |
|---|---|
| System | The SMF ID of the system that wrote the record. |
| Jobname | Filter by job name. |
| Job Number | Filter by job number. This list will be populated with the job numbers from jobs matching the job name, allowing selection of specific jobs by job number. |
| Read Time | Filter by job read time. This list will be populated with the read times from jobs matching the job name, allowing selection of specific jobs by read time. |
SMF records used for this report
| Type | Subtype |
|---|---|
| 30 | 1, 2, 3, 4, 5, 6 |